Solvent Vapours Transmitter
From
£1,116.62
Excluding VAT
Volatile Organic Compounds transmitter E2618-PID is a member of new PluraSens® family of multifunctional measurement instruments.
The instrument utilises highly sensitive photoionization detectors (PID) with extremely low minimal detection levels. The transmitter exhibits sensitivity to compounds with ionization potential less than 10.6 eV, i.e. to most solvent vapors.
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the transmitter to safety or building automation systems.
Range
Quantity
More Information
- Highly sensitive Photo Ionization Detector
- Range 0...40 or 0...200 ppm isobutylene
- Resolution 0,01 ppm or 1 ppm isobutylene
- 2 × 4-20 mA or 0-10 V, RS485
Technical Specification
Detected vapors acetone, ethanol, toluene, xylene etc
Default calibration isobutylene
Sensor type Photo Ionization Detector
Sampling method diffusion
Detection range 0...40 ppm isobutylene0...200 ppm isobutylene
Resolution 0,01 ppm C4H8 for 40 ppm range1 ppm C4H8 for 200 ppm range
Sensor lifetime 5 years
Power supply 12...36 VDC (default)24 VAC as option
Digital interface RS485, Modbus RTU protocol
Analog outputs 2 × 4-20 mA / 0-10 V, user settable
Enclosure grey ABS plastic, wall mount, IP65
Dimensions H82 × W80 × D55 mm
Operating conditions -40...+65 °C, < 95 %RH
Downloads
Download Spec Sheet
Are you looking for a quotation for a complete remote monitoring system?
We supply complete monitoring systems, pre-connected and pre-configured ready for installation onsite.